DESIGN YOUR ROOM WITH WOODY WAVY

Combining the technologies used in the membrane as well as conventional porous absorbers, Woody Wavy offers the biggest absorption effectiveness you can find. Designed to sit or hang in the corner of the room, Woody Wavy boasts exceptional effectiveness at the lowest frequencies (40-80 Hz) while doing a very good job in mid and high frequencies as well.

Superior efficiency

The absorber features a heavy yet flexible diaphragm that works like a spring thanks to an air-tight cavity behind it. When low-frequency sound energy hits the membrane, it causes it to vibrate, transforming energy into vibrations. There is also an additional porous layer behind the membrane that the air is pushed through, as well as a thin absorption layer in front of it.

This sophisticated solution ensures superb functionality because both low and high frequencies are absorbed while giving you perfect control over the reverberation of the room.

Focus on the quality

We pride ourselves on offering handmade sustainable products which are also safe to use. That’s why we never use mineral or glass wool as a filling material. We use an acoustic absorption material called Envizol that is made out of recycled PET.

Each Wavy is a true original made by hand from sustainable materials using our signature patented design.

Patented design

The design of the Woody Wavy absorber is patented and protected under the European industrial design no. 008611321-0006 and 008611321-0007.

Pack more than one

While a single corner piece will improve the acoustics of your rooms, more are usually required to achieve the best result. Ideally, there should be an absorber in each corner of your room. Check out our straightforward guide to see how to furnish your room with low-frequency absorbers.

How to make use of Woody Wavy

• Put it in the corners where its effectiveness at low frequencies is the highest.

• Combine it with broadband absorption and diffusion features to treat the room as a whole.

• Check our home studio guide and tips & tricks section to find out more about acoustics. Alternatively, you can contact us. We’d be happy to help.

Properties

Woody Wavy is a high-end acoustic absorber that treats all frequencies, especially below 100 Hz.

Technical sheet.

Installation instructions.

• 100% Czech handmade product with a quality guarantee 

• Membrane technology - highest absorption effectiveness between 40-80 Hz

• Contains eco-friendly PET felt Envizol (recycled plastic)

• Safe and healthy materials only: no glass or mineral wool used

• Dimensions: 60 x 120 x 26 cm (width x height x depth) 

• Net weight approx. 21 kg 

• Specifically designed for placement in the corner of the room

  • wall hanging system included

• Always ensure that the product is fastened to the wall

• Luxury wood finish

• Made to measure version available on request

• Interior use only.

• Wipe with a damp cloth using soap and water solution.

How we make it

FAQ

Why corners?

Low-frequency sound waves have the highest energy in the corners of the room. That’s why you want to absorb them right there. 

The smaller and the more cubic the design of your room, the more low-frequency mess your room will produce. This is due to room modes, the collection of resonances that exist in the room. 

Room modes might seem a little tricky at first, but you can get a good idea of what they are if you read our home studio guide and tips & tricks section.

How many absorbers should I use?

Start by putting at least two but preferably four pieces in the corners of your room. This will certainly improve the acoustics, but it may not be enough. Additional absorbers will probably be required if low frequencies still sound rather messy. 

Having said that, more is not necessarily better. Before you order more absorbers, we recommend you consult our room modes calculator and measure the frequency response. This will help you decide how many absorbers you really need. 

It isn’t as complicated as it might sound. Still, feel free to get in touch if you need any help.

Why is it so expensive?

Woody Wavy combines the benefits of conventional porous absorbers and innovative membrane technology, featuring a membrane that despite being heavy, is thin and flexible. Its sophisticated design translates into market-leading effectiveness across the entire deep and low bass frequency spectrum (up to 100 Hz).

Put simply, the price is higher because it’s good and costs more to produce.

Can I use the wall panels Woody Queen instead of Woody Wavy?

Absolutely. Woody Queen panels are quite effective at low frequencies, but not quite as effective as a Woody Wavy. 

Don’t despair if our Woody Wavy absorbers are out of your budget now because of their unique and sophisticated design. Conventional porous features can do a good job too. Just remember that because low-frequency sound waves are very long, they need to be absorbed quite far from the wall (leave a gap behind the Woody Queen).

Is this the bass trap?

Absorbers designed to damp low-frequency energy are commonly referred to as bass traps. This is despite the fact that technically speaking, there is no way for you to trap bass. 

That being said, we don’t mind if you call our Woody Wavy a bass trap. What matters to us is it works – and really well at that.

Testimonials

WE RECOMMEND

Product inquiry